Infernus Electric Bain Marie with Tap – GN Pan Compatible

Description

The Infernus INF-BMT is a compact commercial electric bain marie designed for keeping prepared foods hot and ready for service in restaurants, cafés, takeaways, catering trailers and other professional kitchens.

Its gastronorm-compatible well gives you the flexibility to configure the bain marie around your menu. It can accommodate 1 x GN 1/1 pan, 2 x GN 1/2 pans or 3 x GN 1/3 pans, making it suitable for holding anything from a larger quantity of one dish to several different sauces, sides or prepared foods.

The wet heat system uses a water bath beneath the GN pans to provide gentle, indirect heating. An adjustable thermostat allows the temperature to be controlled throughout service, while separate power and heating indicator lights make operation straightforward.

Two 600W heating plates provide a total power output of 1.2kW. The stainless steel construction and compact 500mm-wide design make the INF-BMT a practical countertop solution where kitchen space is limited.

Unlike the INF-BM, this model features a built-in drainage tap, making it quicker and easier to empty the water tank after service.

GN pans are not included.

Product Features

• Commercial electric wet heat bain marie
• Flexible gastronorm pan configuration
• Fits 1 x GN 1/1 pan
• Fits 2 x GN 1/2 pans
• Fits 3 x GN 1/3 pans
• Built-in drainage tap
• Adjustable thermostatic temperature control
• Twin 600W heating plates
• 1.2kW total power
• Power and heating indicator lights
• Stainless steel construction
• Temperature safety limiter
• Supplied with UK 3-pin plug
• Compact 500mm-wide countertop design
• GN pans not included

Product Specifications

Using the Bain Marie

Place the bain marie on a solid, level surface and make sure the thermostat is switched off before connecting the unit to the power supply.

Fill the water tank before switching the bain marie on. The water should touch the bottom of the GN pans, with the manufacturer’s manual recommending a water level approximately 25mm above the heating base.

Place the required GN pans into the well, switch the unit on and adjust the thermostat to the desired temperature. The power indicator shows when the unit is switched on, while the heating indicator illuminates during heating and switches off once the selected temperature has been reached.

Never operate the bain marie without sufficient water in the tank. The unit is fitted with an 85°C temperature limiter to protect the heating tank if the water level becomes too low or scale builds up around the heating base.

After service, switch the unit off, unplug it and allow it to cool before opening the drainage tap and emptying the water tank. The tank should then be cleaned and dried ready for its next use.

Electrical Information

The INF-BMT is supplied with a UK 3-pin plug. Connect the unit directly to a suitable fixed socket outlet.

Do not use an extension lead or share the socket with other high-power appliances.